1. Home
  3. WS80 Ultrasonic Wind Speed & Direction, Solar Radiation & Light, Temp & Humidity Sensor Array

WS80 Ultrasonic Wind Speed & Direction, Solar Radiation & Light, Temp & Humidity Sensor Array

$83.99 USD - $99.99 USD
含税费。 结账时计算的运费。
封装版本&传感器或网关链接频率: 北美 MHz 915
$83.99 USD
$109.99 USD $83.99 USD
-$26.00 USD
WS80 freeshipping - ecowitt (7263979634850)
$83.99 USD
$109.99 USD $83.99 USD

特征
室外温度和湿度
超声波风速、阵风风速、风向
太阳光强度和紫外线指数

规格

测量

范围

准确性

解决

风速

0~40m/s

<10m/s，+/-0.5m/s

≥10m/s，+/-5%

0.1M/秒

风向

0~359°

<10m/s，待定

≥10m/s，±15°

1°

温度

-40~60℃

±1℃

0.1℃

湿度

1~99%

±5%

1%

光

0~300Klux

±15%

10勒克斯

紫外线照射

1~15

±2

1

最后4s最大风速>=5m/s， 1s检测风速；
最后4s最大风速≥3m/s且小于5m/s， 2s检测风速；
最后4s最大风速<3m/s， 4s检测风速。
风速低于5m/s 风向的离散度会增加。
笔记 风速读数将是一个实时值（最新的采样数据将报告给接收器）。

规格（传输）

射频频率： 915/868/433 MHz(北美：915MHz；欧洲：868MHz；其他地区：433MHz)
空旷场地传输距离： 射频频率 915/868MHz 时为 300m（1000 英尺）
射频频率 433MHz 时为 200m（600ft）
传感器报告间隔： 4.8秒

规格（功率）

风速计传感器

太阳能电池板（内置）：6.5V/4mA

风速计传感器（备用）

2 节 AA 1.5V 锂电池（不含）

零件清单

1

太阳能超声波风速计，集成光和紫外线、空气温度/湿度传感器（可选加热器，适用于雪/冰条件下的气候）

1

用于安装在杆上的 U 型螺栓套件（2 件/套）

1

U 形螺栓套件的螺纹螺母（M6 尺寸）（4 件/套）

1

超声波风速计安装臂

1

超声波风速计安装手环

1

用户手册（本手册）


打包信息
长*宽*高：36*16*12cm
重量：1300克
电池：无

Manual & Firmware Download

Compatibility Instructions

for all ecowitt network consoles

Please follow the table to make sure you choose the right sensors and concoles before check out.
Note: The "1/4/8/16" means 1 console supports 1/4/8/16 sensors
( excluding accessories )

Customer Reviews

Based on 8 reviews
88%
(7)
13%
(1)
0%
(0)
0%
(0)
0%
(0)
D
Dominik Niakamal
Great product with lots of sensors!

We are very satisfied with the WS80 weather sensor. We are using it together with an RTL-SDR (rtl_433) to read out the sensor data to keep our blinds safe by automatically moving up when storm is coming.

T
Thomas Knöfel

WS80 Ultrasonic Wind Speed & Direction, Solar Radiation & Light, Temp & Humidity Sensor Array

M
Mario Murphy
Cloud-free data collection!

Setup was super easy. I'm using it with a GW1200. As documented, if the gateway has no preexisting connection to a certain type of sensor, pairing happens automatically when the sensor is powered & reset button pressed.

Next up is to finish building a suitable mount (tower) for this sensor array.

C
Cedric
Pas encore installé

J'ai acheté ce capteur mais pas encore installé c'est mon cadeau de Noel, mais tout me semble de bonne qualité. En plus l'envoie a été très rapide.

D
Dominique C.
Just a little bit more to be perfect.....

About accuracy of my WS80 I can say that it's far more better than my previous wind speed sensor. On thing could be easily better Why is it not possible to access the WS80 Temp/Humidity data when a WH31 is detected ? As the WH31 place is better than the WS80 Temp/Hum sensor (to high) I understand that the WH31 has the priority, but why, in this case, don't we consider the WS80 Temp/Hum as an extra Temp/Hum sensor ?
I like that there is no on/off switch as this is not very useful and is subject to problems as the item is always outside by all weather.

12