WN1821_C Console with 4.9" LCD Display and Built-in CO₂ Detector

常规价格 $84.99 USD
常规价格 促销价 $84.99 USD
含税费。 结账时计算的运费
封装版本&传感器或网关链接频率: 北美 MHz 915
常规价格 $84.99 USD
常规价格 促销价 $84.99 USD

特征

室内天气监测,包括二氧化碳检测

4.9英寸液晶显示屏和内置Wi-Fi网关

Ecowitt 生态系统传感器的专用展示中心(更多详细信息请参见兼容性表);

测量:CO2;温度和湿度;气压;


显示内容:

时间&周;日期或 CO2 PPM 水平、备用电池状态; Wi-Fi和RF信号状态;

室内温湿度,或WN34或WN35或WH51(最多8个通道);

具有最小和最大记录的多通道温度/湿度传感器。

土壤湿度(WH51)、叶面湿度(WN35)、多通道传感器(WN30/WH31/WN34S/WN34L/WN36)可在LCD上无缝显示。


云服务器内容:

数据和图表记录:相对压力和绝对压力;室内温度和湿度;多通道温湿度;


服务

网站页面:ecowitt.net; 192.168.4.1;

应用程序:Ecowit;

天气服务器支持:ecowitt官方云服务器;

地下世界;天气云;天气观测网站;定制(Homeseer;Homeassistant;);


规格(显示)

测量 范围 准确性 解决 工作条件
气压 300 至 1100 hPa(8.85 至 32.5 英寸汞柱)

绝对压力:±1.5hpa;

相对压力:±2hpa

0.1hPa(0.01 英寸汞柱) 推荐
温度(室内) 0°C 至 50°C(32°F 至 122°F) ±0.2°C(±0.4°F) 0.1°C (0.1°F) 推荐
-40°C 至 60°C(-40°F 至 140°F) ± 0.6°C (± 1.0°F) 0.1°C (0.1°F) LCD 显示屏或 CO2 可能会出现故障
湿度(室内) 30% 至 70% ±1.8% 1%
推荐
1% 至 99% ±3% 普通的
二氧化碳 0 至 40000 ppm ±(50 ppm + 读数的 5%) 1ppm 推荐

电源:5V⎓1.0A 5.0W

备用电源:2节AA电池(支持至少24小时工作)


无线传输

空旷场地传输距离:50 m (165 ft.),取决于路由器和环境

射频频率:2.4 GHz

WLAN 和以太网:802.11 b/g/n(802.11n,最大 150 Mbps)

网上更新:定制1-5分钟(建议1分钟)


零件清单

1* WN1821 显示器(控制台)

1* USB 转 2.5*0.7mm DC 5V 显示器电源线


打包信息

重量:350克

电池:不适用

Compatibility Instructions

for all ecowitt network consoles

Please follow the table to make sure you choose the right sensors and concoles before check out.
Note: The "1/4/8/16" means 1 console supports 1/4/8/16 sensors
( excluding accessories )

Customer Reviews

Based on 1 review
0%
(0)
100%
(1)
0%
(0)
0%
(0)
0%
(0)
m
markogts
Pity for the need of AC power

All in all is a quite well thought weather station. Set-up and connection between other sensors, wlan and server was straightforward. I'd prefer an LCD screen to the TFT if it could ensure long term operation under battery power alone. TFT is very good looking, unfortunately it constrains the location choice in the house (it must be near an AC outlet).

Another small issue I found is that the station records air pressure, but there seems to be no way to have it displayed directly; you can only see it on the server or app.

Finally, graphs available on the server are quite crude (no scale setting possible, no graph overlay, no possibility to edit labels, no preferred settings etc), I'll have to set up a routine to fetch data and display them on my own somehow.