- 使用 30 厘米(11.81 英寸)不锈钢探头测量水温
- 在开放区域,无线范围可达 300 英尺(100 米)
- 每 77 秒传输一次读数
- IP65防水
- 可与液晶屏单独工作
- 可与 GW1000/GW1100 或 HP2551/HP3500/HP3501 气象站控制台配合使用
- 最多支持 8 个通道(附加传感器单独出售)
特征
温度感应器
• 对于电缆版本,使用 3m(10ft)电缆传感器测量温度;对于探头版本,使用 30cm(11.81 英寸)不锈钢探头传感器测量温度。
• 在开放区域,无线范围扩展至 300 英尺(100 米)。
• 每77 秒传输一次读数。
• IP65 防水。
• LCD 显示当前读数。
与 GW1000/GW1100 Wi-Fi 网关配对时:
• 在WS View 应用程序的实时数据页面上查看温度读数(要求网关和您的手机使用相同的Wi-Fi 网络)。
• 最多支持8 个通道。可以在应用程序上编辑频道名称。
• WS View 应用程序上显示电池电量信息。
与气象站控制台 (HP2551/HP3500/HP3501) 配对时:
• 在显示屏上实时查看温度数据。
• 最多支持8 个通道。通道名称可以在控制台上编辑。
上传到 Ecowit 天气服务器时:
• 在网站上查看当前温度数据、历史记录和图表。
• 接收来自服务器的电子邮件警报。
• 通过访问网站,使用智能手机、笔记本电脑或计算机进行远程监控。
笔记:
该温度传感器有两个版本:探头版本(WN34S)和电缆版本(WN34L)供您选择。探头传感器主要用于测试土壤温度,而有线版本主要用于测试水温。
这两个版本将被软件识别为相同的传感器类型。如果您同时购买了两者,它们将共享 8 个通道,并且一台接收器支持的两个传感器总数不能超过 8 个。
规格
电源:1x1.5V AA 电池(不含)
传感器类型:环氧树脂密封NTC热敏电阻
频率:433 / 868 / 915 MHz,取决于位置(北美:915 MHz;欧洲:868 MHz;其他地区:433 MHz)
无线传输范围:100M(300英尺)
传感器报告间隔:77秒
感应温度:-40~60°C(40~140°F)
电缆传感器长度:3m(10ft)
探头传感器长度:30 厘米(11.81 英寸)
电池寿命:最少 12 个月
防水等级:IP65
包装清单:
1个温度传感器
传感器安装支架 1 个
一个用于安装到杆上的软管夹
一颗用于安装的六角 M12 螺钉
一颗螺丝 ST D3.2*M2.0*6 用于安装
一本用户手册
Compatibility Instructions
for all ecowitt network consoles
Please follow the table to make sure you choose the right sensors and concoles before check out.
Note: The "1/4/8/16" means 1 console supports 1/4/8/16 sensors
( excluding accessories )